Products:
Industrial Machinery:Industrial Tools
National
Cutting Tools
Industrial Tools
Home>Products>Pipe & Bolt Threading Tangential Chaser:
General Specification:
We offer a wide collection of Tangential chaser
such as thread
cutting chaser, pipe threading chaser, bolt threading chaser and rod
threading chaser. We stand amid the well known steel tangential chasers
suppliers in India. We are specialized NCT threading tangential chaser
manufacturer. This Threading Tangential Chaser is manufactured from
metallurgical standard proven imported high speed steel. These NCT
Threading Tangential Chasers are designed as per international
threading standard, which assist us in manufacturing natural and fine
threads. These Landis tangential chasers are available in various
lengths ranging from 1” to 6”depending on the size
of the die head.
BSP, BSPT, NPT, UNF, UNC, BSW threads that can be excellently and
easily be cut on this tangential chaser.
NCT Tangential Chasers are manufactured from imported High Speed Steel
which must pass exacting metallurgical standard. Experienced heat
treatment with the automatic imported heat treatment plant and imported
Testing equipments, assures that they will perform satisfactorily in
service and produce quality threads within the tolerance for which they
ware intended.
NCT Chaser are interchangeable. If one Pc. Of a chaser set is damaged
& is beyond use. Then same No. pc. Of the other chaser set
lying in
stock may be used and there will not be any difference in threading
performance and the damaged set can be replaced without the necessity
of replacing entire set.
| Model No. | NCT-25 |
| Max. Pitch Can be Rolled (in mm) | 2.5 |
| Max. Dia can be Rolled in feed (in mm) | 25 |
| Max. Dia can be Through feed (in mm) | 16 |
| Max. Rolling Length in feed (in mm) | 80 |
| Max. Rolling Length Through feed | Indefinite |
| Max. Outer Dia Thread Rolls (in mm) | 150 |
| Spindle Dia (Bore Dia) (in mm) | 54 |
| Max. Rolling Force | 8 Tons |
| Power for Roll Spindles | 3 H.P. 1440 RPM |
| Power for Hydraulic Pump | 2 H.P. |
| Power for coolant pump | ½ H.P. |
| Model NCT-1.1/2" | 3/8"" to 1.1/2" |
| Saddle Movement | 10"-12" |
| Spindle Speed Range | 60-90 |
| Number of Spindle Speed | 2 |
| Threading Capacity | 3/8" to 1.1/2" |
| Production per Hour | 60-80 |
| H.P. Required | 3 H.P. 960 RPM |
| Lead Screw | NIL |
| Weight (KG) | 550 |
| Die-Head Size | Holder Set/Sets (Provided) | Chaser Section |
| 1/4” to 1” | 1/4” to 1” | 3” x 1.3/64 (Set of 4 Pcs) |
| 3/8” to 1. 1/2" | 3/8” to 1. 1/2" | 4” x 1.3/64 (Set of 4 Pcs) |
| 1/2" to 2.1/2” | 1/2" to 1. 1/2" & 1.5/8 to 2.1/2" | 4” x 1.1/4” (Set of 4 Pcs) |
| 1" to 4" | 1" to 2" 2.1/2" to 4" |
4” x
1.1/4” (Set of 4 Pcs) 5” x 2.1/4” (Set of 4 Pcs) |
| 2.1/2" to 6" | 2.1/2" to 3" 3.1/2" to 4" 4.1/2" to 6" |
5” x 2.1/4” (Set of 6 Pcs) |
| 4" to 8" | 4” to
5.1/2” 5.1/2” to 8” |
5” x 2.1/4” (Set of 6 Pcs) |
| Model No. | P-140 B |
| Sizes for pipe(Inches) |
1/2 - 3 |
| Specification |
230V/50Hz.,750W,26/11 rpm |
| Die Head
Including(Inch.) |
1/2 – 2 & 2.1/2 - 3 |
| Dies Including(Inch.) BSPT or NPT | 1/2 –
3/4,1 - 2 & 2.1/2 – 3 |
| Weight(Kgs.) | 135.000 |
| Model No. | P-140 C |
| Sizes for pipe(Inches) |
1/2 - 4 |
| Specification |
230V/50Hz.,750W,24/10 rpm |
| Die Head
Including(Inch.) |
1/2 – 2 & 2.1/2 - 4 |
| Dies Including(Inch.) BSPT or NPT | 1/2 –
3/4,1 - 2 & 2.1/2 – 4 |
| Weight(Kgs.) | 150.000 |
| Model No. | P-140 D |
| Sizes for pipe(Inches) |
2.1/2
– 6 |
| Specification |
230V/50Hz.,1100W,16/6 rpm |
| Die Head
Including(Inch.) |
2.1/2 – 4 & 5 - 6 |
| Dies Including(Inch.) BSPT or NPT | 2.1/2
– 4 & 5 - 6 |
| Weight(Kgs.) | 215.000 |